论文期刊 Publications(第一或通讯作者发表SCI论文20篇,EI论文3篇)

23.  Jun Xiong*, Yanjiang Li, Ziqiu Yin, Hui Chen. Determination of surface roughness in wire and arc additive manufacturing based on laser vision sensing. Chinese Journal of Mechanical Engineering. 2018, Accepted. (SCI)

22.  Jun Xiong*, Yanjiang Li, Rong Li, Ziqiu Yin. Influences of process parameters on surface roughness of multi-layer single-pass thin-walled parts in GMAW-based additive manufacturing. Journal of Materials Processing Technology. 2018, doi.org/10.1016/j.jmatprotec.2017.09.020. (SCI)

21.  Jun Xiong*, Rong Li, Yangyang Lei, Hui Chen. Heat propagation of circular thin-walled parts fabricated in additive manufacturing using gas metal arc welding. Journal of Materials Processing Technology. 2018, 251: 12-19. (SCI)

20.  Jun Xiong*, Yangyang Lei, Rong Li. Finite element analysis and experimental validation of thermal behavior for thin-walled parts in GMAW-based additive manufacturing with various substrate preheating temperatures. Applied Thermal Engineering. 2017, 126: 43-52. (SCI)

19.  Jun Xiong*, Yangyang Lei, Hui Chen, Guangjun Zhang. Fabrication of inclined thin-walled parts in multi-layer single-pass GMAW-based additive manufacturing with flat position deposition. Journal of Materials Processing Technology. 2017, 240: 397-403. (SCI)

18.  Jun Xiong, Ziqiu Yin, Weihua Zhang*. Closed-loop control of variable layer width for thin-walled parts in wire and arc additive manufacturing. Journal of Materials Processing Technology. 2016, 233: 100-106. (SCI)

17.  Jun Xiong, Ziqiu Yin, Weihua Zhang*. Forming appearance control of arc striking and extinguishing area in multi-layer single-pass GMAW-based additive manufacturing. International Journal of Advanced Manufacturing Technology. 2016, 87(1-4): 579-586. (SCI)

16.  Jun Xiong, Shuyi Liu, Guangjun Zhang*. Thermal cycle and microstructure of backing weld in double-sided TIG arc horizontal welding of high-strength steel thick plate. International Journal of Advanced Manufacturing Technology. 2015, 81, 1939-1947. (SCI)

15.  Jun Xiong, Guangjun Zhang*, Weihua Zhang. Forming appearance analysis in multi-layer single-pass GMAW-based additive manufacturing. International Journal of Advanced Manufacturing Technology. 2015, 80: 1767-1776. (SCI)

14.  Tao Yang, Jun Xiong*, Hui Chen. Effect of process parameters on tensile strength in plasma-MIG hybrid welding for 2219 aluminum alloy. International Journal of Advanced Manufacturing Technology. 2016, 84: 2413-2421. (SCI)

13.  尹紫秋, 熊俊*. 基于ACT匹配的GMAW增材制造熔池形貌三维重建. 焊接学报. 2018 (EI, Accepted)

12.  雷洋洋, 熊俊*, 李蓉, 陈辉. 基板厚度对薄壁件GMAW增材制造温度场的影响. 焊接学报. 2018. (EI, Accepted)

 

2015年之前论文(Publications before 2015, SCI: 10, EI: 1篇)

11.  Jun Xiong, Guangjun Zhang*, Zhilong Qiu, Yongzhe Li. Vision-sensing and bead width control of a single-bead multi-layer part: material and energy savings in GMAW-based rapid manufacturing. Journal of Cleaner Production. 2013, 41, 82-88. (SCI)

10.  Jun Xiong, Guangjun Zhang*. Adaptive control of deposited height in GMAW-based layer additive manufacturing. Journal of Materials Processing Technology. 2014, 214, 962-968. (SCI)

9.   Jun Xiong, Guangjun Zhang*. Online measurement of bead geometry in GMAW-based additive manufacturing using passive vision. Measurement Science and Technology. 2013, 24115103 (7pp). (SCI)

8.   Jun Xiong, Guangjun Zhang*, Hongming Gao, Lin Wu. Modeling of bead section profile and overlapping beads with experimental validation for robotic GMAW-based rapid manufacturing. Robotics and Computer-Integrated Manufacturing. 2013, 29(2), 417-423. (SCI)

7.   Jun Xiong, Guangjun Zhang*, Jianwen Hu, Lin Wu. Bead geometry prediction for robotic GMAW-based rapid manufacturing through a neural network and a second-order regression analysis. Journal of Intelligent Manufacturing. 2014, 25(1), 157-163. (SCI)

6.   Jun Xiong, Guangjun Zhang*, Jianwen Hu, Yongzhe Li. Forecasting process parameters for GMAW-based rapid manufacturing using closed-loop iteration based on neural network. International Journal of Advanced Manufacturing Technology. 2013, 69(1), 743-751. (SCI)

5.   Jun Xiong, Guangjun Zhang, Yutang Hu, and Lin Wu. Reconstruction of Emission Coefficients for a Non-axisymmetric Coupling Arc Based on MALDONADO’s Method. Chinese Journal of Mechanical Engineering. 2012, 25(4): 781-785. (SCI)

4.   Guangjun Zhang, Jun Xiong*, Hongming Gao, Lin Wu. Effect of process parameters on temperature distribution in twin-electrode TIG coupling arc. Journal of Quantitative Spectroscopy & Radiative Transfer. 2012, 113(15), 1938-1945. (SCI)

3.   Guangjun Zhang, Jun Xiong*, Hongming Gao, Lin Wu. Reconstruction of emission coefficients for a non-axisymmetric coupling arc by algebraic reconstruction technique. Journal of Quantitative Spectroscopy & Radiative Transfer. 2011, 112(1), 92-99. (SCI)

2.  Guangjun Zhang, Jun Xiong*, Yutang Hu. Spectroscopic diagnostics of temperatures for a non-axisymmetric coupling arc by monochromatic imaging. Measurement Science & Technology, 2010, 21(10), 1-5. (SCI)

1.   熊俊, 张广军*, 胡玉堂. 基于迭代算法的焊接电弧发射系数重建. 焊接学报. 2010, 31(11): 105-108. (EI)

  

授权发明专利(2项)

1.  熊俊, 陈辉, 杨涛, 苟国庆, 刘艳. GMA增材制造双被动视觉传感检测装置及其检测方法. 专利号: ZL201510282713.6.

2.  熊俊, 雷洋洋, 尹紫秋, 陈辉. 倾斜薄壁结构件电弧填丝增材制造方法. 专利号: ZL201610408053.6.

 

Copyright © 2011 http://inc.swjtu.edu.cn 西南交通大学信息网络中心