登录 帮助 返回首页 加入收藏夹 交大主页


论文论著

发表英文独著一部、英文合著二部、中文合著一部,制定ISO国际标准一项,在IJMS、IJSS、Engineering Fracture Mechanics,Polymer、Polymer Testing、Wear、Tribology International、Applied Surface Science等知名学术期刊发表论文80余篇,SCI收录51篇。

英文专著

Han JIANG, Scratch Behaviors of Polymeric Materials, ISBN 978-3-8484-0342-4,V Akademikerverlag GmbH & Co. KG, 2012

英文合著

Han JIANG, MECHANICAL PROPERTIES' INFLUENCE ON POLYMER SCRATCH BEHAVIOR: EXPERIMENTAL STUDY AND MECHANISMS ANALYSIS,Frontiers in Applied Mechanics,World Scientific Publishing Co Pte Ltd ,ISBN: 978-1-78326-683-8,2015
Browning Robert, Han JIANG, Sue Hung-Jue,Tribology of Polymer Nanocomposites:Chapter 15, ISBN 978-0-444-53155-1,Elsevier,2008

中文合著

康国政、蒋晗、阚前华, 连续介质力学基础及其应用,科学出版社,2015

近年发表期刊论文


2020
1. Qian Cheng, Han JIANG*, Yonghua Li, Effect of fiber content and orientation on the scratch behavior of short glass fiber reinforced PBT composites, Tribology International,v146, 106221,2020
2. Chengkai Jiang, Han JIANG*, Constitutive modeling of the rate- and temperature-dependent macro-yield behavior of amorphous glassy polymers, International Journal of Mechanical Sciences, (accepted),2020

2019
1. Han JIANG*, Chengkai Jiang, Finite deformation constitutive model for macro-yield behavior of amorphous glassy polymers with a molecular entanglement-based internal-state variable, International Journal of Mechanical Sciences, V161–162, 105064, 2019
2. Zhongmeng Zhu, Chengkai Jiang, Han JIANG*, A visco-hyperelastic model of brain tissue incorporating both tension-compression asymmetry and volume compressibility, Acta Mechanica, v230(6), 2125–2135, 2019
3. Qidi Peng, Zhongmeng Zhu, Chengkai Jiang, Han JIANG*, Effect of stress relaxation on accelerated physical aging of hydrogenated nitrile butadiene rubber using time-temperature-strain superposition principle, Advanced Industrial and Engineering Polymer Research, v2, 61-68,2019
4. Wei Rao, Juan Zhang, Guozheng Kang, Chao Yu, Han JIANGA meso-mechanical constitutive model of bulk metallic glass composites considering the local failure of matrix, International Journal of Plasticity, V115, 238-267, 2019
5. Chengkai Jiang, Han JIANG*, Jianwei ZHANG, Guozheng KANG, An analytical model of friction behavior during polymer scratch with conical tip Friction,V7(5), 466–478, 2019
6. 马俊,王冰,范海冬, 蒋晗*, 基底纹理对镍/铜纳米双层膜刮擦行为影响的分子动力学模拟, 摩擦学学报, 2019, 39(5):577-584
7. Zhongmeng Zhu, Yan Xia, Jian Li, Chengkai Jiang, Han JIANG*, Rate dependent shear debonding between a highly stretchable elastomer and a rigid substrate: delayed debonding and pre-stretch effect, Engineering Fracture Mechanics, V 222, 106743,2019
8. 夏炎,朱忠猛, 蒋晗*, 表面直接氟化改性对有机玻璃弯曲疲劳性能的影响, 固体力学学报, 2019(accepted)

2018
1. Jianwei Zhang, Han JIANG*, Chengkai Jiang, Guozheng Kang, Qianhua Kan, Yonghua Li, Experimental and numerical investigations of evaluation criteria and material parameters’ coupling effect on polypropylene scratch, Polymer Engineering and Science, v58(1), 118–122, 2018
2. Han JIANG*, Yaofu Wei, Qian CHENG, Zhongmeng ZHU, Scratch Behavior of Low Density Polyethylene Film: Effects of Pre-stretch and AgingMaterials & Design, v 157, 235-243, 2018
3. Jie Liu, Han JIANG*, Qian Cheng, Chaoming Wang, Investigation of nano-scale scratch and stick-slip behaviors of polycarbonate using atomic force microscopy, Tribology International,125, 59–65, 2018
4. 魏耀富, 程前,蒋晗*,基底材料和残余预张应力对低密度聚乙烯(LDPE)薄膜刮擦性能影响的实验研究, 实验力学, 33(1): 24-30, 2018
5. 程前,蒋晗*,李永华,洪志豪,乔亮,陈迪,张亮亮,玻璃纤维增强PBT 复合材料刮擦行为研究, 塑料工业 , 46(8): 72-75, 2018
6. Guangyan Liu, Lu Wang, Yanan Yi, Libin Sun, Li Shi, Han JIANG, Shaopeng Ma,Inverse identification of tensile and compressive damage properties of graphite material based on a single four-point bending test, Journal of Nuclear Materials,V509,445--453, 2018
7. Song, Hongxiaia ; Ke, Liaoliang ; Wang, Yuesheng ; Yang, Jie ; Jiang, HanTwo-dimensional frictionless contact of a coated half-plane based on couple stress theory, International Journal of Applied Mechanics,v10,n5, 2018
8. Yunpeng Wang, Li Ding, Chunyu Zhao, Sheng Wang, Shouhu Xuan, Jiang, Han, Xinglong Gong,A novel magnetorheological shear-stiffening elastomer with self-healing ability, Composites Science and Technology, V168, 303--311, 2018

2017
1. Han JIANG*, Jianwei ZHANG, Zhuoran YANG, Chengkai JIANG, Guozheng KANG, Modeling of competition between shear yielding and crazing in amorphous polymers’ scratch, International Journal of Solids and Structures, v124, 215-228, 2017
2. Zhongmeng ZHU, Yan XIA, Guangguang NIU, Jie LIU, Chaoming WANG, Han JIANG*, Effect of direct fluorination on the mechanical and scratch performance of nitrile butadiene rubber, Wear, v376-377, 1314-1320, 2017
3. 朱忠猛, 蒋晗*, 第21届材料磨损国际会议的总结评述, 摩擦学学报, 2017 , 37 (4) :558-564
4. Kaijuan Chen, Guozheng Kang, Chao Yu , Han JIANG , H. Jerry Qi , Non-proportional multiaxial ratchetting of ultrahigh molecular weight polyethylene polymer: experiments and constitutive model, Mechanics of Materials, 2017, 112, 76-87
5. Han JIANG*, Chengkai Jiang, Jianwei Zhang, Guozheng Kang, Qianhua Kan, Yonghua Li, New criteria for evaluating the scratch-resistance properties of polypropylene, SPE Plastics Research Online(2017), 10.2417/spepro.006927

2016
1. Qian CHENG, Chengkai JIANG, Jianwei ZHANG, Zhuoran YANG, Zhongmeng ZHU, Han JIANG*, Effect of thermal aging on the scratch behavior of poly (methyl methacrylate), Tribology International, v101, 110-114, 2016
2. Zhongmeng Zhu, Qian Chen, Chengkai Jiang, Jianwei Zhang, Han JIANG*, Scratch behavior of the aged hydrogenated nitrile butadiene rubber, Wear, v352–353, 155-159, 2016
3. Kaijuan Chen, Guozheng Kang, Fucong Lu, Jianhang Xu, Han JIANG, Temperature-dependent uniaxial ratchetting of ultra-high molecular weight polyethylene, Fatigue & Fracture of Engineering Materials & Structures, v39(7), 839-849,2016
4. Fucong Lu, Guozheng Kang, Yilin Zhu, Congcong Xi , Han JIANG, Experimental observation on multiaxial ratchetting of polycarbonate polymer at room temperature, Polymer Testing, v50, 135-144, 2016
5. Jianwei ZHANG, Han JIANG*, Chengkai JIANG, Qian CHENG, Guozheng Kang, In-situ observation of temperature rise during scratch testing of poly (methylmethacrylate) and polycarbonate, Tribology International, v95, 1-4, 2016
6. Kaijuan CHEN, Guozheng KANG, Chao YU, Fucong LU, Han JIANG, Time-dependent uniaxial ratchetting of ultrahigh molecular weight polyethylene polymer: Viscoelastic-viscoplastic constitutive model, Journal of Applied Mechanics, V83(10), 2016
7. Hang Li, Guozheng Kang ,Yujie Liu, Han JIANG, Non-proportionally multiaxial cyclic deformation of AZ31 magnesium alloy: Experimental observations, Materials Science and Engineering: A,v671 (1) ,70–81, 2016
8. Rao Wei, Zhang Juan, Han JIANG, Kang Guozheng, Meso-mechanical constitutive model of bulk metallic glass matrix composites, Mechanics of Materials, 103: 68-77, 2016
9. Chen Kaijuan, Kang Guozheng, Lu Fucong, Chen Jia, Han JIANG, Effect of relative humidity on uniaxial cyclic softening/hardening and intrinsic heat generation of polyamide 6 polymer, Polymer Testing, 56, 19-28, 2016


2015
1. Kaijuan Chen, Guozheng Kang, Fucong Lu, Han JIANG*, Uniaxial cyclic deformation and internal heat production of ultra-high molecular weight polyethylene, Journal of Polymer Research, v22(11):217, 2015
2. Zhongmeng Zhu, Chengkai Jiang, Qian Chen, Jianwei Zhang, Shaoyun Guo, Ying Xiong, Baoqiang Fu, Wenlong Yang, Han JIANG*, Accelerated aging test of hydrogenated nitrile butadiene rubber using the time-temperature-strain superposition principle, RSC Advances, v5(109), 90178-90183, 2015
3. Chengkai Jiang, Han JIANG*, Jianwei Zhang, Guozheng Kang, A visco-elastic-plastic constitutive model for uniaxial ratcheting behaviors of polycarbonate , Polymer Engineering and Science, v55(11), 2559-2565, 2015
4. Chengkai Jiang, Han JIANG*, Zhongmeng Zhu, Jianwei Zhang, Shaoyun Guo, Ying Xiong, Application of Time–Temperature–Stress Superposition Principle on the Accelerated Physical Aging Test of Polycarbonate , Polymer Engineering and Science, v55(10), 2215-2221, 2015
5. Jianwei Zhang, Han JIANG*, Guozheng Kang, Chengkai Jiang, FucongLu, A new form of equivalent stress for combined axial–torsional loading considering the tension–compression asymmetry of polymeric materials, RSC Advances, v5(89), 72780-72784,2015
6. Han JIANG*, Qian CHENG, Chengkai JIANG, Jianwei ZHANG, Yonghua LI, Effect of Stick-slip on the Scratch Performance of Polypropylene , Tribology International, v91, 1-5, 2015
7. Jianwei Zhang, Han JIANG*, Chengkai Jiang, Guozheng Kang, Fucong Lu, Accelerated ratcheting testing of polycarbonate using the time-temperature-stress equivalence method, Polymer Testing, v44, 8-14, 2015
8. Congcong Xi, Guozheng Kang, Fucong Lu, Jianwei Zhang, Han JIANG, An experimental study on uniaxial ratcheting of polycarbonate polymers with different molecular weights , Materials and Design, v67, 644-648, 2015
9. 张建伟,熊英,郭少云,蒋成凯,朱忠猛,蒋晗*丁腈橡胶热处理过程的时间-温度-应力等效性, 高分子材料科学与工程. 2015, 31, 56-9.


Before 2015...
1. Kang Guozheng, Dong Yawei, Liu Yujie, Han JIANG, Macroscopic and microscopic observations on uniaxial ratchetting of two-phase Ti-6Al-4V alloy, Materials Characterization, v92, 26-35, 2014
2.Fucong Lu, Guozheng Kang, Han JIANG, Jianwei Zhang, Yujie Liu,Experimental studies on the uniaxial ratchetting of polycarbonate polymer at different temperatures, Polymer Testing, v39, 92-100,2014
3. Han JIANG*, Jianwei Zhang, Guozheng Kang, Congcong Xi, Chengkai Jiang, Yujie Liu, A test procedure for separating viscous recovery and accumulated unrecoverable deformation of polymer under cyclic loading, Polymer Testing,v32,1445–1451,2013
4. Dong Yawei, Kang Guozheng, Liu Yujie, Han JIANG,Multiaxial ratcheting of 20 carbon steel: Macroscopic experiments and microscopic observations, Materials Characterization,v83,1-12,2013
5. Pan Douxing, Kang Guozheng, Han JIANG, Viscoelastic Constitutive Model for Uniaxial Time-dependent Ratcheting of Polyetherimide (PEI) Polymer, Polymer Engineering & Science, 52(9), 1874–1881,2012
6. Han JIANG, Robert Browning, Peng Liu, T. A. Chang and Hung-Jue Sue, Determination of epoxy coating wet-adhesive strength using a standardized ASTM/ISO scratch test, Journal of Coatings Technology Research, v 8, n 2, 255-263, 2011
7. Mohammad Motaher Hossaina, Han JIANG and Hung Jue Sue,Effect of Constitutive Behavior on Scratch Visibility Resistance of Polymers-A Finite Element Method Parametric Study, Wear, 270,751–759,2011
8. Han JIANG, Browning Robert L., Hossain Mohammad M., Sue Hung-Jue, Fujiwara Mikihiko, Quantitative evaluation of scratch visibility resistance of polymers, Applied Surface Science, v 256, n 21, 6324-6329, 2010
9. Han JIANG , Browning, R., Whitcomb, J.D., Ito, M., Shimouse, M., Chang, T.A., Sue H.-J., Mechanical modeling of scratch behavior of polymeric coatings on hard and soft substrates, Tribology Letters, v 37, n 2, 159-167, 2010
10. Han JIANG, Browning Robert, Sue Hung-Jue
,Understanding of scratch-induced damage mechanisms in polymers , Polymer, v50, n 16, 4056-4065, 2009
11. Moghbelii Ehsan ,Sun Luyi, Han JIANG, Boo Woong J., Sue, Hung-Jue , Scratch behavior of epoxy nanocomposites containing α-zirconium phosphate and core-shell rubber particles, Polymer Engineering and Science, v 49, n 3, 483-490, 2009
12. Han JIANG, Browning Robert, Fincher Jason, Gasbarro Anthony, Jones Scooter, Sue Hung-Jue,Influence of surface roughness and contact load on friction coefficient and scratch behavior of thermoplastic olefins, Applied Surface Science, v 254, n15, 4494-4499, 2008
13. Browning Robert L. , Han JIANG, Moyse Allan, Sue Hung-Jue, Iseki Yuki,Ohtani Kousuke, Ijichi Yasuhito, Scratch behavior of soft thermoplastic olefins: Effects of ethylene content and testing rate, Journal of Materials Science, v43, n 4, 1357-1365, 2008
14. Han JIANG, Lim G.T., Reddy J.N., Whitcomb J.D., Sue H.-J., Finite element method parametric study on scratch behavior of polymers, Journal of Polymer Science, Part B: Polymer Physics, v 45, n 12, 1435-1447, 2007

部分会议论文

Han JIANG, Yonghua Li, Bo Yang, Yan Yang, Zhongfu Luo, Chao Ding,Guangqiang Chen, H.J. Sue, Stick-slip phenomena and its influence on polymer scratch, 11th-Annual SPE TPO Conference, 2010
Yonghua Li, Bo Yang, Yan Yang, Zhongfu Luo, Chao Ding,Guangqiang Chen, Han JIANG, Study of scratch performance of polypropylene based automotive material, 11th-Annual SPE TPO Conference, 2010
R.L. Browning, P. Liu, Han JIANG, M. Hossain, and H.-J. Sue, A Comparative Study of Scratch Visibility Assessment Between Erichsen Delta L and ASTM/ISO Methods, 11th-Annual SPE TPO Conference, 2010
Han JIANG, R.Browning, B.T.A. Chang, H.J.Sue, A new approach for determination of wet adhesive strength of epoxy coatings on steel substrate, NACE International - Corrosion 2010 Conference and Expo. 2010
Browning, Robert L., Han Jiang, Liu, Peng, Moyse, Allan, Sue, Hung-Jue,Recent progress in scratch & mar testing and evaluation of thermoplastic olefins International Polyolefins Conference 2010, 2010,
Browning, Robert Lee
,Han JIANG, Song, Yishu, Sue, Hung-Jue, Ito, Motoko, Fujiwara, Mikihiko, Gasbarro, Anthony,A new method for abrasion resistance measurement of thermoplastic olefins
, 67th Annual Technical Conference of the Society of Plastics Engineers - ANTEC, Conference Proceedings, v 2, 908-913, 2009
Han JIANG, Whitcomb John D., Sue Hung-Jue Mechanical modeling of scratch induced periodic damage, 11th-Annual SPE TPO Conference, 2009
Chang Benjamin T. A. , Sue Hung-Jue, Han JIANG, Browing Bobby,Wong Dennis, Pham Ha, Guo Shu, Kehr Al, Mallozzi Meghan, Snider William, Siegmund Al,Integrity of 3LPE pipeline coatings - Residual stresses and adhesion degradation, Proceedings of the Biennial ASME International Pipeline Conference, IPC, v2, 75-86, 2009
Browning Robert Lee ,Han JIANG, Moyse Allan, Sue Hung-Jue, Lau Edmund, Quantitative abrasion evaluation of thermoplastic olefins, International Polyolefins Conference - FLEXPACKCON 2008, v 3, 1703-1707, 2008
Han JIANG, Browning Robert L., Sue,Hung-Jue, Automated quantitative scratch visibility determination based on ASTM D7027-05 test method, Automotive TPO Global Conference, p 436-443, 2008
Browning R.L., Lim G.-T., Han JIANG, Moyse A., Sue H.-J., Chen H., Earls J., White J. Scratch behavior of polymer coatings, Society of Plastics Engineers Annual Technical Conference - ANTEC, Conference Proceedings, v 1, p 37-40, 2006
Han JIANG, Browning R., Moyse A., Sue H.-J. , Effects of surface texture and surface roughness on polymer scratch behavior, Society of Plastics Engineers Annual Technical Conference
ANTEC Conference Proceedings, v 3, p 1503-1507, 2007
Han JIANG , Lim G.T., Ready J.N., Whitcomb J.D., Sue H.-J., Parametric study on scratch behavior of ploymers, Society of Plastics Engineers Annual Technical Conference - ANTEC, Conference Proceedings, v 1, 50-54, 2006
Browning R.L. , Lim G.T., Han JIANG, Moyse A., Moghbelli E., Sue H.-J. ,AE integrated approach to study scratch behavior of TPOs, International Conference on Polyolefins 2006, v 2, 527-531, 2006
Browning, R. , Lim G., Han JIANG, Sue H.-J. , Scratch behavior of anisotropic polypropylene surfaces, Automotive Thermoplastic Polyolefins (TPO) Global Conference , v 2006, 422-430, 2006
Chang B.T.A. , Han JIANG, Sue H.-J., Guo S., StJean G., Pham H., Wong D., Kehr A., Mallozzi M., Lo K.H., Disbondment mechanism of 3LPE pipeline coatings, 17th International Conference on Pipeline Protection, 247-256, 2007
Browning Robert Lee , Han JIANG, Moyse Allan, Sue Hung-Jue, Lau Edmund, Mar behavior of thermoplastic olefins, Society of Plastics Engineers Annual Technical Conference - ANTEC,Conference Proceedings, v 1, p 255-259, 2007
Browning R., Han JIANG, Lim G.-T., Moyse A., Sue H.-J.,Evaluation and modeling of scratch resistance of polymers, Source: Society of Plastics Engineers Annual Technical Conference - ANTEC, Conference Proceedings, v 2, 728-730, 2006